Begin with assigning cat scratching posts to the base platform. Every hole in your selected base can fit one, any height scratching post.

Locate flat head hex socket screw inside metal washert out of scratching post kit.

Turn base platform upside down. On the back side of the hole you will find a recess for the washer. Insert the bolt into the hole through the washer.

Take the 6 mm Allen wrench from the kit and tighten the bolt to the opposite side of the post, having first centered them in.

Tighten the bolt firmly using the long part of the wrench.

Turn the base upside down and place it on a flat surface.

Let your pets appreciate your work.

Screw in the connecting hex socket flat end hairpin screw about a third of the way, leaving room for the platform holder and installation of the next post.

Install the platform holder and center it in the desired direction for subsequent installation of the platform itself.

Screw in the next post, clamping the platform holder tightly between them.

Take the round or square platform from the kit and place it with the Velcro facing up.

Use the stainless steel knurled screw and T-nut lock flange to lock the platform in the desired position after positioning it relative to the holder.

Keep in mind that you can adjust the platform position in several planes depending on the desired direction. You can also adjust the extension to position the platform on two or more holders between two or more posts for better stability.

Place the T-nut lock flange on top pointing the extended side into the hole. Insert the knurled screw from the back and tighten them together.

Use the available slots to securely attach the platform to the holder and tighten all knurled screws firmly for the best possible fit of the surfaces.

To ensure that the platform is firmly clamped and does not slide on the holder, tighten all the screws as tightly as you can.

Make sure all 4 knurled screws are installed and tightened properly. It doesn't matter if you have a round or square platform.

Let your pets appreciate the work done.

Shake the skin before attaching it to the platform. Position it so that all the Velcro has the largest overlapping area.

Once the skin is positioned, ensure a secure fit of the Velcro by connecting them with a little force.

Keep in mind that how well the skin is positioned determines how well it will withstand interaction with your pets.

Do not deny yourself the pleasure of enjoying the beautiful super soft fur and feel how cozy and comfortable your pet will be on it.

Over time, the faux fur skin can become worn and lose its appearance. To restore its appearance and softness, simply remove the skin again, shake it a few times and put it back.

If you want to change a worn out skin or change its color, simply purchase it separately and install it instead of the old one.

To increase the height of your scratching post, use additional posts. They are easy to install by simply screwing them into the previous post using hairpin screw.

If you decide not to install an additional platform but simply increase the height by adding extra scratching posts, use the spacer from the set, respectively, installing it between two posts, thereby maintaining the equal height of several parallel scratching posts with different number of platforms installed.

Position the end platform on the post using the center hole or the second order holes (between an edge and center hole ). Any of these holes will work for mounting the platform.

Use a flat head hex socket screw and a 6mm Allen wrench to securely attach the end platform to the scratching post.

Shake the fur skin and position it on the platform. Ensure a secure fit of the Velcro by connecting them with a little force.